Drone photography from SkunkApe Productions in Green Bay is billed by the hour: $150 per hour for on-site work such as flying and shooting, and $125 per hour for editing and other computer-based work. Hours are bought in prepaid blocks of 10, 20 or 40, so a 10-hour block of on-site time is $1,500.
The rest of this page explains how the numbers add up and what makes a job take more or fewer hours, so you can budget before you call.
What are the rates for drone photo and video work?
Two rates cover nearly every drone job:
- $150 per hour for on-site work: drone flights, ground photo and video shoots, and training.
- $125 per hour for computer-based work: photo editing, video editing, and preparing files for your website or social channels.
An hour of flying plus an hour of editing comes to $275. The same two rates apply whether the subject is a job site, a commercial building, a property listing or an event. You can see how these rates sit alongside the rest of our services on the pricing page.
How do the prepaid hour blocks add up?
Work is purchased in prepaid blocks of 10, 20 or 40 hours. Here is the plain arithmetic at each rate.
On-site time at $150 per hour
- 10 hours: $1,500
- 20 hours: $3,000
- 40 hours: $6,000
Editing and computer work at $125 per hour
- 10 hours: $1,250
- 20 hours: $2,500
- 40 hours: $5,000
A larger block does not change the hourly rate. It simply gives you more hours to work with, which matters if you plan to film the same property several times or want a steady stream of photos and clips over a season.
What drives the number of hours a drone job takes?
We do not publish a typical total, because two jobs that sound alike can need very different amounts of time. These are the factors that move the count.
How many visits you need
A single set of photos of a finished building is one trip. Progress documentation on a construction project is a series of trips, and each one adds on-site hours. If your project is ongoing, our page on construction drone photography covers how repeat visits are usually planned.
Photos, video, or both
Stills and video are captured differently. Asking for both on the same visit usually means more time in the air and more time in editing afterward.
How finished the final files need to be
Lightly corrected photos for an internal progress report take less editing than a polished video with titles, music and multiple cuts for a website, a trade show and social media. Editing is where the $125 rate does most of its work.
Where the site is and how the airspace works there
Some locations near airports sit inside controlled airspace, where a drone pilot needs authorization before flying. That adds planning, and it can shape when and how high the drone can fly.
Does travel outside Green Bay change the price?
On-site work is available within about 50 miles of Green Bay, including De Pere, Ashwaubenon, Howard, Bellevue, Appleton and the rest of the Fox Valley. Sites farther out are quoted with travel included. Editing and other computer-based work can be done remotely for clients anywhere.
What should you ask any drone operator before you hire them?
Price is only part of the decision. Commercial drone work in the United States falls under the FAA’s Part 107 rules, and a few questions will tell you whether an operator is set up to follow them. The FAA explains the requirements on its page for Part 107 commercial operators.
- Remote pilot certificate. Ask to see it. Under 14 CFR Part 107, the person acting as remote pilot in command must hold a remote pilot certificate with a small UAS rating.
- Drone registration. The FAA requires drones flown under Part 107 to be registered and marked with the registration number. Registration costs $5 and lasts three years.
- Airspace authorization. If your site is in controlled airspace, ask how the operator will get authorization before the flight.
- Insurance. If your company or general contractor requires a certificate of insurance from vendors, ask for it before anyone flies.
FAA rules change, so check the FAA’s official pages for the current requirements rather than relying on any summary, including this one.
How do you get an accurate number for your project?
Tell us the address, what you want to show, how many visits you expect, and where the photos or video will be used. With that, Nick or Brennen can map out the hours and the block size that fits. You can see examples of the work on our drone photo and video page.
Call 920-393-7273 or request a quote and we will walk through the job with you.
Frequently asked questions
Is editing included in the on-site rate?
No. On-site time, including flying and shooting, is $150 per hour. Editing and other computer-based work is billed separately at $125 per hour.
What sizes do the prepaid blocks come in?
Blocks come in 10, 20 or 40 hours. At the on-site rate those are $1,500, $3,000 and $6,000. At the editing rate they are $1,250, $2,500 and $5,000.
Do you fly outside the Green Bay area?
Yes. On-site work covers about 50 miles around Green Bay, including Appleton and the Fox Valley. Farther sites are quoted with travel.
